**BLOB PIGEON**

This sky rat has a articulating foot and a spot for a magnet. Remove its head to reveal a mini compartment, perfect for scavenger hunts and secret notes!

- articulating foot
- secret compartment
- magnetic foot with hidden magnet or glue in options
- print-in-parts and multicolor files included
- prints without supports

**PERSONAL USE ONLY**

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab "patreon.com/bloblab")

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

**PRINT INSTRUCTIONS**

- .1mm layer height recommended
- print as parts and snap together or add superglue
- uses 3 x 8mm magnets
- for the hidden magnet foot, right click to add a pause at 3.8 mm height
- tube holds a 20mm wide note

Blob Pigeon - Magnetic Secret Message Art Toy

Blob Lab Pigeon 7 All.STL

**BLOB FOX**

This cute flexi fox has legs and a tail that moves as well as a head that swivels. The Blob Fox also has two bonus accessories, a scarf and bandana! It can be printed in multicolor as well as separate parts on single color printers.

- flexi legs and tail
- articulating head
- print-in-parts and multicolor files included
- bonus scarf and bandana accessories

**PERSONAL USE ONLY**

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab "patreon.com/bloblab")

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

**PRINT INSTRUCTIONS**

- no supports
- 3+ perimeters recommended for strong neck joint
- eyes and nose snap into head, use superglue if too loose, scale parts 00.5% if too tight
- for single color printers, consider a color swap on the body at 4mm for a great two-tone effect

Blob Fox - Articulating Flexi Fidget Art Toy

Blob Lab Fox 8 All.STL

**BLOBHEAD**

The original Blobhead is here! Blobheads are modular art toys with swappable heads and bodies. The simple design will allow for all kinds of customizations and future characters. Blobheads have a special screw that connects their head to their body while still allowing their head to turn. The arms articulate and their hands are able to grip future objects.

- modular system to swap heads and bodies
- twisting head
- articulating arms
- print-in-parts

**PERSONAL USE ONLY**

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab "patreon.com/bloblab")

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

**PRINT INSTRUCTIONS**

- 2mm standard layer height or smaller for high quality
- no supports
- seam in back recommended
- eyes snap in head
- arms snap in via the upright position at a slight angle. There's a small bump on the end which should bend and give the arms a good friction fit.
- twist screw into body until firm, then twist head onto screw. The head has a special friction grip and should be able to still spin once full screwed on. To remove the head, pull up and twist.

Blobhead - Modular Articulating Art Toy

Blob Lab Blobhead All 17.3mf

**BLOB GECKO**

This cute flexi gecko can stick to your fridge and look around. Make sure your gecko gets enough sun by bathing on it's rock!

- flexible legs and tail
- articulating head
- magnetic feet and hidden/no magnet version
- print-in-parts and multicolor files included
- bonus rock container

**PERSONAL USE ONLY**

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab "patreon.com/bloblab")

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

**PRINT INSTRUCTIONS**

- 2mm standard layer height
- no supports
- brim recommended
- 3x8mm magnets fit 100% scale, they should press fit, but may need glue depending on your printer. For the hidden magnet version, right click on your slicer timeline and "add stop" at the 4mm mark to place your magnets.
- eyes snap in head, head snaps on body

Blob Gecko - Flexi Magnetic Art Toy with Rock

Blob Lab Gecko All 5.3mf

**BLOB EASTER EGGS**
These five colored eggs are perfect for stashing treats and toys. The patterns include Spiral, Dots, Zig Zag, Lines, and Diamonds. This design is made for multicolor printers.

- egg container
- prints without supports
- five egg patterns for multicolor printing
- original solid egg include
- 3mf and stl files included

MULTICOLOR PRINTERS ONLY. No print-as-parts files included. [Blob Bunny](https://thangs.com/designer/BlobLab/3d-model/Blob%20Bunny%20-%20Articulated%20Flexi%20Art%20Toy-1027788) not included.

**PERSONAL USE ONLY**

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab)

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

**3D PRINTING SETTINGS**

- 2mm standard layer height
- no supports
- brim recommended for egg lid
- stl files can be colored by setting the paint bucket tool to 90 degree fill angle
- if you scale the egg, the friction gets looser as you go smaller and tighter as you get bigger

As always please reach out with any feedback or questions. Happy printing!

Blob Easter Eggs - Patterns For Multicolor Printers

Blob Lab Easter Eggs All 5.3mf

**BLOB EGG AND YOLKIES**
This crackin' egg container comes with four Yolky characters. Print them out, hide them in the eggs, and collect them all! The egg lid can be twisted halfway to look like it's about to crack open.

- egg container
- four Yolky art toys
- prints without supports
- both multicolor and print-in-parts files included

**PERSONAL USE ONLY**

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab)

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

**3D PRINTING SETTINGS**

- 2mm standard layer height
- no supports
- brim recommended for egg lid
- eyes and highlights can be printed separately and snapped/glued in
- eyes are the same for all Yolkies, circle yolk is the same for the Hardboiled and Fried Yolky
- if you scale the egg, the friction gets looser as you go smaller and tighter as you get bigger

As always please reach out with any feedback or questions.

Blob Egg and Yolkies - Crackin Egg Container and Yolk Art Toys

Blob Lab Egg and Yolky All 3.3mf

**BLOB BUNNY**

Watch out! These cute little bunnies might just jump straight out of your printer if you bring carrots around them.

- flexible legs
- articulating head
- bonus carrot
- prints without supports
- both multicolor and print-in-parts files included

**PERSONAL USE ONLY**

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab "patreon.com/bloblab")

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

**PRINT INSTRUCTIONS**

- 2mm standard layer height
- 3 or 4 perimeters recommended for stronger head connection
- no supports
- brim recommended for smaller scaled versions
- eyes and highlights can be printed separately and snapped/glued in, or printed with a multicolor using the "Head With Eyes" file
- snap the head onto the body

Always looking to improve printability, if you have suggests please reach out.

Blob Bunny - Articulated Flexi Art Toy

240305 Bunny 6 All.STL

**BLOB TURTLE**
This turtle may be slow, but he rides in style with a full set of hats kept in his shell for any occasion.

- shell compartment
- articulating head
- three stylish hats
- print without supports
- 3MF and STL files available

**PERSONAL USE ONLY**

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab "patreon.com/bloblab")

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

**PRINT INSTRUCTIONS**

- standard .2mm layer height
- no supports
- 3 walls recommended
- brim recommended
- eyes and highlights can be printed separately and snapped/glued in, optional head with fixed eyes included
- glue the shell edge to the body using the connector to guide the placement, depending on your bridging capabilities, you may need to scale the connector height.

Always looking to improve printability, if you have suggests please reach out.

Blob Turtle - Articulated Fidget Toy

240302 Turtle 8 All.STL

**BLOB CROCODILE**

_UPDATE 2024-06-05_
- _made eyes and teeth separate parts_
- _updated head for easier more stable printing_
- _better proportions and refined details_
- _improved leg flexibility_
- _added another tail piece_

---

This little swamp puppy has a moving mouth and flexible body. The Blob Croc can be printed in parts and assembled or printed with multicolor printers.

- articulating mouth
- flexible body and legs
- prints without supports
- print-in-parts and multicolor files included

**PERSONAL USE ONLY**
Purchasing this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab)

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

**PRINT SETTINGS**

- brim recommended
- no supports
- snap in eyes and teeth, use superglue if needed
- head snaps onto jaw
- color change at 2.6mm for added belly color

Always looking to improve printability, if you have suggests please reach out.

Blob Crocodile - Articulated Flexi Fidget Toy

Blob Lab Croc 8 All.STL

Blob Lab Croc 8 Body with Teeth.STL

Blob Lab Croc 8 Body.STL

Blob Lab Croc 8 Bottom Teeth.STL

Blob Lab Croc 8 Head with Eyes.STL

Blob Lab Croc 8 Head.STL

Blob Lab Croc 8 Left Eye Highlight.STL

Blob Lab Croc 8 Left Eye.STL

Blob Lab Croc 8 Left Teeth.STL

Blob Lab Croc 8 Multicolored.3mf

Blob Lab Croc 8 Right Eye Highlight.STL

Blob Lab Croc 8 Right Eye.STL

Blob Lab Croc 8 Right Teeth.STL

**BLOB CAT**

This cute little kitten has a flexible body and a magnetic mouth to catch it's favorite treat!

- no supports
- articulated body
- bonus fish model
- 3MF and STL files available

**PERSONAL USE ONLY**

Downloading or purchasing this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab "patreon.com/bloblab")

**COPYRIGHT PROTECTED FILES**

All Blob Lab designs are protected under copyright law. Your purchase or download does not give you the right to sell or distribute the digital files in any way.

**PRINT SETTINGS**
- standard .2mm layer print settings
- 3 walls recommended
- brim recommended
- insert ball magnet into cavity during print, 8mm size for 100%, 5mm size for 60%. The magnet should be loose so it can orient automatically

Always looking to improve printability, if you have suggests please reach out.

Blob Cat - Articulated Flexi Fidget Toy

240216 Cat 6.3mf

240216 Cat 6.STL

240216 Fish 2.STL

<p dir="ltr"><span style="white-space: pre-wrap;">The Blob Croc has been updated with some great improvements. You can print the eyes and teeth as parts. I reworked the design to improve proportions. I fixed the legs so they move better and added an extra tail segment. If you purchased the Croc, you can download the new version for free!</span></p>

 The Blob Croc has been updated with some great improvements. You can print the eyes and teeth as parts. I reworked the design to improve proportions. I fixed the legs so they move better and added an extra tail segment. If you purchased the Croc, you can download the new version for free!

Blob Crocodile Update!!

designing printable art toys

commercial license available on [Patreon](https://www.patreon.com/bloblab)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

BlobLab

Designer posts