A set of three stackable and stackable bowls to mix and match :)

**A stackable and scalable tray for whatever is just flying around and needs a proper storage location.** Combine multiple colors or multicolor filament for a beautiful stack. Add more whenever you filled them up. 

**Scaling / size**
Upscaling (100% +): as big as you want
Big (100%): Diameter of about 226 mm with a height of 50 mm + a 2.4 mm edge
Regular (80%): Diameter of about 180 mm with a height of 40 mm + a 2 mm edge
Small (50%): Diameter of about 130 mm with a height of 25 mm + a 1.2 mm edge

Photos by Roomberry

**Print settings**
Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Stackable bowl “cream”

stackable_bowl_cream.stl

Stackable bowl “waterdrop”

stackable_bowl_waterdrop.stl

**A stackable and scalable tray for whatever is just flying around and needs a proper storage location.** Combine multiple colors or multicolor filament for a beautiful stack. Add more whenever you filled them up. 

**Scaling / size**
- Upscaling (100% +): as big as you want
- Big (100%): Diameter of about 226 mm with a height of 50 mm + a 2.4 mm edge
- Regular (80%): Diameter of about 180 mm with a height of 40 mm + a 2 mm edge
- Small (50%): Diameter of about 130 mm with a height of 25 mm + a 1.2 mm edge

Photos by Roomberry

**Print settings**
Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Stackable bowl bundle

Categories:

Tags:

Models in this collection

Stackable bowl “cream”

Stackable bowl “waterdrop”

Stackable bowl “cactus”